Pivoting bearings, pivoting bearing according to DIN ISO 12240-1 (DIN 648) K series from mbo Osswald, are on request deliverable with threaded bolt (pivoting bearing with threaded bolt, pivoting bearings with threaded bolt). This high performance version is high performance and material stainless steel.

Pivoting bearing DIN ISO 12240-1 K high performance version stainless steel with threaded bolt 20 FG

can be regreased, suitable for higher rotation speeds

Please first choose whether you are a private or corporate customer!

We have unfortunately had to adapt the price of this item due to cost increases in our supply chain. We would be happy to work with you to find a solution to minimise the impact of this increase. Please get in touch with your contact person to discuss this:

The quantity currently authorised for the shop has been exceeded. However, we would be delighted to receive a request from you!

Unfortunately, there is a minimum order volume of [[minsurface]] units due to the coating used. Alternatively, you can receive the products uncoated (bright, lightly oiled) or in stainless steel (1.4305, 1.4301 or 1.4404) even as a one-off part:

Undercut steel (1.0715/1.0718) Stainless steel (1.4305) Stainless steel A2 (1.4301) Stainless steel A4 (1.4404)

The product was successfully added to your shopping cart

Price per piece

[[ formatedPrice ]]On request

from [[ price.from ]] pieces only [[ price.price ]]

Optional

Delivery time

[[ computedDelivery(deliveryData?.deliveryTimeDays) ]]

On request

still [[ stock ]] pieces in stock

Express delivery (+[[ (!loading.delivery && !loadAll && hasExpress?formatPrice(deliveryData.ExpresslieferungPauschale*tax):"") ]])
Fast-track this part (max. 400 units) through our production facility. Shorten the delivery time by 1-2 working days. We are currently exclusively testing this delivery service for Germany.

Private customer (with VAT)

Corporate customer (without VAT)

Minimum quantity of [[minquantity]] pieces. From then on a minimum position value of [[minrevenue]] € applies.

Total price

[[ formatedSumprice ]]On request

incl. VAT
plus shipping costs

* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing J7/H7, for light-alloy housing K7
load high - for steel housing K7, for light-alloy housing M7

Article no.

16 72 6482 0020/000

Identifier

Pivoting bearing DIN ISO 12240-1 (DIN 648) K series high performance version stainless steel with threaded bolt

Size

20 FG

Material group

Stainless steel

Surface

bright

Material

Outer ring: stainless steel 1.4305 (X8CrNiS18-9), lathe work

Bearing shell: special bronze CuSn8

Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, hard chrome-plated on the bearing surface, alternative: stainless steel 1.4034 (X46Cr13), hardened, grinded, polished

Threaded bolt: stainless steel 1.4305 (X8CrNiS18-9)

d Tolerance

24,3

d2 Tolerance

M20 x 1,5 FG

Thread version

Fine-pitch thread right

sw1

Static basic load rating C0 (kN)

188,5

Permissible rpm*

540

Angle of misalignment a°

Bearing radial tolerance in mm min. - max.

0,010 - 0,060

Mass (g) per piece

400

Lubrication

regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation

Rod end_Pivoting bearing

Pivoting bearing

Series

K series

Maintenance

needs maintenance

Threaded bolt

Yes

Sealing

Suitable for clevises