Pivoting bearing DIN ISO 12240-1 K series standard version 16 Steel galvanised
can be regreased, suitable for axial thrusts
Please first choose whether you are a private or corporate customer!
We have unfortunately had to adapt the price of this item due to cost increases in our supply chain. We would be happy to work with you to find a solution to minimise the impact of this increase. Please get in touch with your contact person to discuss this:
The quantity currently authorised for the shop has been exceeded. However, we would be delighted to receive a request from you!
Unfortunately, there is a minimum order volume of [[minsurface]] units due to the coating used. Alternatively, you can receive the products uncoated (bright, lightly oiled) or in stainless steel (1.4305, 1.4301 or 1.4404) even as a one-off part:
The product was successfully added to your shopping cart
[[ title ]]
Price per piece
[[ formatedPrice ]]On request
from [[ price.from ]] pieces only [[ price.price ]]
Optional
Delivery time
[[ computedDelivery(deliveryData?.deliveryTimeDays) ]]
On request
still [[ stock ]] pieces in stock
Fast-track this part (max. 400 units) through our production facility. Shorten the delivery time by 1-2 working days. We are currently exclusively testing this delivery service for Germany.
Accessories for [[ title ]]
Price per piece [[ formatTaxPrice(aprice[article.number]) ]]On request
|
Selection for data retrieval
On request
[[ computedDelivery(adeliveryData[article.number]?.deliveryTimeDays) ]]
Shopping cart
Total price
[[ formatedSumprice ]]On request
incl. VAT
plus shipping costs
* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing J7/H7, for light-alloy housing K7
load high - for steel housing K7, for light-alloy housing M7
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing J7/H7, for light-alloy housing K7
load high - for steel housing K7, for light-alloy housing M7
Article no.
10 70 0000 0016/013
Identifier
Pivoting bearing DIN ISO 12240-1 (DIN 648) K series standard version
Size
16
Material group
Steel
Surface
galvanised
Material
Outer ring: undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
Bearing shell: special brass CuZn40Al1
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished
d
16
d Tolerance
H7
A
15
B
21
d1
19,3
d2
38
d2 Tolerance
h6
Static basic load rating C0 (kN)
64,5
Permissible rpm*
350
Angle of misalignment a°
15
Bearing radial tolerance in mm min. - max.
0,005 - 0,05
Mass (g) per piece
115
Lubrication
regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +200 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Pivoting bearing
Series
K series
Maintenance
needs maintenance
Threaded bolt
No
Sealing
No
Suitable for clevises
No