Rod ends, rod end DIN ISO 12240-4 (DIN 648) K series from the specialist mbo Osswald, are available with sealings (rod end with sealing, rod ends with sealing). This high performance version for high load is with female thread, needs maintenance and material steel galvanised.

Rod end DIN ISO 12240-4 K high performance for high load with sealing female thread 8 M8 Steel

can be regreased, suitable for high pressure loads and tensile forces

Please first choose whether you are a private or corporate customer!

We have unfortunately had to adapt the price of this item due to cost increases in our supply chain. We would be happy to work with you to find a solution to minimise the impact of this increase. Please get in touch with your contact person to discuss this:

The quantity currently authorised for the shop has been exceeded. However, we would be delighted to receive a request from you!

Unfortunately, there is a minimum order volume of [[minsurface]] units due to the coating used. Alternatively, you can receive the products uncoated (bright, lightly oiled) or in stainless steel (1.4305, 1.4301 or 1.4404) even as a one-off part:

Undercut steel (1.0715/1.0718) Stainless steel (1.4305) Stainless steel A2 (1.4301) Stainless steel A4 (1.4404)

The product was successfully added to your shopping cart

Price per piece

[[ formatedPrice ]]On request

from [[ price.from ]] pieces only [[ price.price ]]

Optional

Delivery time

[[ computedDelivery(deliveryData?.deliveryTimeDays) ]]

On request

still [[ stock ]] pieces in stock

Express delivery (+[[ (!loading.delivery && !loadAll && hasExpress?formatPrice(deliveryData.ExpresslieferungPauschale*tax):"") ]])
Fast-track this part (max. 400 units) through our production facility. Shorten the delivery time by 1-2 working days. We are currently exclusively testing this delivery service for Germany.

Private customer (with VAT)

Corporate customer (without VAT)

Minimum quantity of [[minquantity]] pieces. From then on a minimum position value of [[minrevenue]] € applies.

Total price

[[ formatedSumprice ]]On request

incl. VAT
plus shipping costs

* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.

Article no.

10 53 6483 1008/013

Identifier

Rod end DIN ISO 12240-4 (DIN 648) K series high performance version for high load with sealing female thread

Size

8 M8

Material group

Steel

Surface

galvanised

Material

Housing: thermal treatment steel 1.7225 (42CrMo4), forged, galvanised

Bearing shell: special bronze CuSn8

Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated

Sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline

Fitting rings: brass

Distance liner: stainless steel 1.4305 (X8CrNiS18-9)

d Tolerance

B Tolerance

≈

10,4

M8 x 1,25

Thread version

Regular thread right

12,5

10,5

Static basic load rating C0 (kN)

25,5

Permissible rpm*

1200

Angle of misalignment a°

Bearing radial tolerance in mm min. - max.

0,005 - 0,035

Mass (g) per piece

CETOP

CETOP RP 103 P

Lubrication

via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation

Rod end_Pivoting bearing

Rod end

Series

K series

Maintenance

needs maintenance

Thread

Female thread

Threaded bolt

Sealing

Yes

Suitable for clevises

Temperature

-30 °C - +120 °C