Rod ends, rod end DIN ISO 12240-4 (DIN 648) K series from the specialist mbo Osswald, are available with sealings (rod end with sealing, rod ends with sealing). This version is with male thread, maintenance-free and material stainless steel.

Rod end DIN ISO 12240-4 K series maintenance-free stainless steel with sealing male thread 20 M20FG

suitable for high dynamic pressure loads and tensile forces

Please first choose whether you are a private or corporate customer!

We have unfortunately had to adapt the price of this item due to cost increases in our supply chain. We would be happy to work with you to find a solution to minimise the impact of this increase. Please get in touch with your contact person to discuss this:

The quantity currently authorised for the shop has been exceeded. However, we would be delighted to receive a request from you!

Unfortunately, there is a minimum order volume of [[minsurface]] units due to the coating used. Alternatively, you can receive the products uncoated (bright, lightly oiled) or in stainless steel (1.4305, 1.4301 or 1.4404) even as a one-off part:

Undercut steel (1.0715/1.0718) Stainless steel (1.4305) Stainless steel A2 (1.4301) Stainless steel A4 (1.4404)

The product was successfully added to your shopping cart

Price per piece

[[ formatedPrice ]]On request

from [[ price.from ]] pieces only [[ price.price ]]

Optional

Delivery time

[[ computedDelivery(deliveryData?.deliveryTimeDays) ]]

On request

still [[ stock ]] pieces in stock

Express delivery (+[[ (!loading.delivery && !loadAll && hasExpress?formatPrice(deliveryData.ExpresslieferungPauschale*tax):"") ]])
Fast-track this part (max. 400 units) through our production facility. Shorten the delivery time by 1-2 working days. We are currently exclusively testing this delivery service for Germany.

Private customer (with VAT)

Corporate customer (without VAT)

Minimum quantity of [[minquantity]] pieces. From then on a minimum position value of [[minrevenue]] € applies.

Total price

[[ formatedSumprice ]]On request

incl. VAT
plus shipping costs

* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.

Article no.

16 56 6483 2020/000

Identifier

Rod end DIN ISO 12240-4 (DIN 648) K series maintenance-free version stainless steel with sealing male thread

Size

20 M20FG

Material group

Stainless steel

Surface

bright

Material

Housing: stainless steel 1.4057 (X17CrNi16-2), forged, polished

Bearing shell: special bronze CuSn8 with glued-in PTFE fabric on the bearing surface, alternative: stainless steel 1.4571 (X6CrNiMoTi17-12-2)

Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, hard chrome-plated on the bearing surface, alternative: stainless steel 1.4034 (X46Cr13), hardened, grinded, polished or stainless steel 1.4404 (X2CrNiMo17-12-2), unhardened, grinded, polished

Sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline

Fitting rings: brass

Distance liner: stainless steel 1.4305 (X8CrNiS18-9)

d Tolerance

B Tolerance

≈

24,3

M20 x 1,5 FG

Thread version

Fine-pitch thread right

103

Static basic load rating C0 (kN)

Permissible rpm*

190

Angle of misalignment a°

Bearing radial tolerance in mm min. - max.

0,005 - 0,045

Mass (g) per piece

348

Lubrication

no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -50 °C to +150 °C

Rod end_Pivoting bearing

Rod end

Series

K series

Maintenance

maintenance-free

Thread

Male thread

Threaded bolt

Sealing

Yes

Suitable for clevises

Temperature

-30 °C - +120 °C